Nimbus Water Systems MN-800-TF User Manual download pdf (Page 19)

•

Inspect sump for cracks. Replace as necessary.

•

Lubricate O-ring with an appropriate petroleum or silicone-based lubricant. Install O-ring

into its seat in sump.

•

Install new carbon cartridge with the white rubber ring up.

•

Replace sump by screwing it onto cap in a counter-clockwise direction (as viewed from

top). A wrench should not be needed. Hand tightened is sufficient.

•

Restore water and power; check for leaks.

● Note: New carbon cartridges need to be flushed after being installed. After installation,

open faucet to allow tank water to flush out carbon fines. This water will be black at first.

Allow to flush until water runs clear.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Nimbus Water Systems MN-800-TF User Manual Page 19